- WHEN THE PRINTER CAN’T TEST PAPER
1. Test paper is dirty, need to use cotton swabs dipped in water scrub.
2. Test paper is not equipped good, we need to reinstall again.
3. Test paper machine is broken, we need to change a new one.
4. Small carriage board is broken, we need to change a new one.
- WHEN THE FIGURE LINE INCLINED TO ONE SIDE
1. The servo motor is broken, we need to replace the servo motor.
2. The encoder sensor is dirty, need to use cotton swabs dipped in water to clean.
3. The encoder sensor is broken, we need to change a new one.
- WHEN THE CARRIAGE HIT THE LEFT FRAME WHEN TURNING ON THE PRINTER?
1. The encoder sensor is dirty, need to be cleaned.
2. The encoder sensor is broken, we need to change it.
3.The cable is not connected well, we need try a few times.
- WHEN THERE IS FREQUENT PAPER TESTING
1. The paper feeding sensor is dirty, we need to clean it.
2. The paper feeding sensor is not properly connected to the mainboard.
3. The feeding sensor is broken, we need to change a new one.
- WHEN THERE ARE DROPS OF INK FROM PRINTHEAD IN PRINTING
1. There is still air in the printhead, try a few times more.
2. Tube interface is bad, need to insert or replace the interface.
3. There is leakage of printhead, need to find out where the gas leak and then use glue sealing.
- Who is the best sublimation printer in China?
1.Fedar sublimation printer equips with EPS3200 printhead, smallest droplet is 2.5pl, max resolution can reach 3200DPI, and speed is 250Sqm/h for 8head model FD6198E, which will demo at FESPA Madrid in March, 2020. Welcome your visit!
2.The board is especially designed for Fedar sublimation printer, it’s has high compatibility and more stable performance. While other manufacturer produce sublimation printer on the basis of eco solvent printer, only change head and board.
3.Fedar EPS3200 head sublimation printer adopts 3L ink reservoirs, which ensures long-time continuous printing.
4.Dedicated to the 1.9m printing width sublimation printer market for many years, the product has high requirements for appearance and texture. We have 1.9m, 2.6m, 3.2m printing width, suit for different markets and clients.
5.All of our sublimation printers equips THK rail guide, IGUS belt and Leadshine motors, these make printers run fluently and stably.
6.We are the first manufacture to produce 4/6/8 head sublimation printer, in future will have 12head model,achieves high speed printing and large production demand.
- Why the Fedar Digital Sublimation Printer is blooming ?
Fedar Sublimation Printer now exported mainly to Europe and USA market. And it is blooming,because its widely applied to many different industries, Like sports ware, silk,tour gifts,fashion cloths,bed linings,etc.
The China's best brand sublimation Printer is made in Fedar, Now we have many models by Fedar Printer with 2 heads EPS3200 up to 12pcs printheads, Speed from 98sqm/hr to 300sqm/hr.